Blog Layout

Regulations: noise emissions from outdoor equipment

Guidance for manufacturers, authorised representatives, and responsible persons.

How to comply

The noise emissions of outdoor machinery must be tested in accordance with the standards and procedures specified in the regulations, which allow for production and measurement uncertainties. This procedure includes the creation of technical documentation, providing the information to enable compliance to be assessed.

Equipment must display the relevant Guaranteed Sound Power label. Manufacturers must also declare conformity with all relevant legislation by affixing:

  • the UKCA mark, in the case of outdoor machinery being placed on the market in GB
and/ or
  • the CE or CE and UKNI mark, in the case of outdoor machinery being placed on the market in NI
For equipment subject to noise limits and noise marking, the quality control system of the manufacturer, or the tests performed, need approval from a third-party conformity assessment body. 

Equipment subject to noise marking only can be self-certified by the manufacturer, without the involvement of a conformity assessment body.

The CE marking will be accepted for some equipment being placed on the GB market until 1 January 2022. However, for equipment subject to both noise limits and noise marking which requires mandatory third-party conformity assessment, the new UKCA marking needs to be used immediately after 1 January 2021 if both of the following apply to your product:

  • it is for the GB market
and
  • conformity assessment has been carried out by a UK conformity assessment body and you have not transferred your conformity assessment files from your UK body to an EU recognised body before 1 January 2021.


Toys (Safety) Regulations 2011: Great Britain
By Marcus Elliott August 24, 2022
Obligations of Authorised Representatives placing toys on the market in Great Britain
Personal Protective Equipment
By Mariana UKARA May 25, 2022
Manufacturers are able to appoint authorised representatives to perform certain tasks on their behalf under a written mandate.
By Mariana UKARA February 2, 2022
Legislation applies from primary production to placing animal feed on the market and feeding of food producing animals.
UKCA mark
By Mariana UKARA November 24, 2021
In most cases, you must apply the UKCA marking to the product itself or to the packaging. In some cases, it may be placed on the manuals or on other supporting literature. This will vary depending on the specific regulations that apply to the product.
Making cosmetic products available to consumers in Great Britain
By Marcus Elliott November 4, 2021
The Responsible Person must make sure the cosmetic products they make available are safe. The Responsible Person should: know which ingredients are used in their cosmetic product, including those which are harmful or nanomaterials know about restrictions on what can be put in cosmetic products keep an up to date document with information on the cosmetic product (called the ‘Product Information File’ or ‘PIF’) make any information on the packaging, labelling and instructions for the cosmetic product clearly visible let the Office for Product Safety and Standards (OPSS) know about the cosmetic product (called notification) before it is made available to consumers tell OPSS about any serious harmful effects which are reported about the cosmetic product be able to prove that any claims made when marketing the product are correct
By Mariana UKARA October 20, 2021
The UK Competent Authority for medical devices, the MHRA, has advised that manufacturers not domiciled in the UK must appoint a formal UK Responsible Person (UKRP) or UK Authorised Representative (UKAR) to be able to continue placing medical devices on the UK market.
By Mariana UKARA September 16, 2021
You must include a business name and address on the packaging or food label of pre-packed food products. This must be either: the name of the business whose name the food is marketed under the address of the business that has imported the food Pre-packaged food or caseins sold in NI must include a NI or EU FBO address. If the FBO is not in NI or EU, include the address of your importer, based in NI or the EU. You can continue to use an EU, GB or NI address for the FBO on pre-packaged food or caseins sold in GB until 30 September 2022. From 1 October 2022, pre-packaged food or caseins sold in GB must include a UK address for the FBO. If the FBO is not in the UK, include the address of your importer, based in the UK. The address needs to be a physical address where your business can be contacted by mail. You cannot use an email address or phone number. https://www.gov.uk/guidance/food-labelling-giving-food-information-to-consumers#show-the-name-and-address-of-the-food-business-operator
By Marcus Elliott July 2, 2021
The UKCA is a certification mark that indicates conformity with the applicable requirements for products sold within Great Britain. The UKNI is Northern Ireland’s version of the UKCA mark. It is a new conformity marking for products place on the market in Northern Ireland which have undergone mandatory third-party conformity assessment by an approved body based in the UK. After June 2023, it will be mandatory to place a UKCA or UKNI on products being supplied into the UK. Whilst the UK continue to follow the current Medical Devices Directive, Northern Ireland with Europe now follow the upcoming MDR Medical Devices Regulation. Find out more on the government website: https://lnkd.in/dTE4VTs
By Marcus Elliott April 12, 2021
How do I know if my app is a medical device? If you are using an app for yourself or if you are using an app and you are not a trained healthcare professional, then this advice is for you. If the app you are using has a medical purpose it is important that it is UKCA or CE marked. There is a legal definition of a medical device but here are some practical examples; Depending on information you enter about yourself • Those which calculate medicine doses for you to take /inject • Those that tell you that you have a medical condition or disease or give you an individual percentage risk score of having one. Read more: https://www.gov.uk/government/publications/medical-devices-software-applications-apps
Overview of UK Responsible Person
By Marcus Elliott April 1, 2021
Manufacturers should aim to appoint their UK Responsible Persons as soon as possible, where required. The UK Responsible Person must then register relevant devices with the MHRA in line with the above grace periods depending on the device class.
More Posts
Share by: